In March, the ten accumulators sold by Winwin to a Brazilian customer were well received, so the customer ordered another ten accumulators from Winwin in June. Winwin guarantees better quality, one year of after-sales service and installation guidance

The accumulator in a water jet pump serves several important functions:

1. Pressure Stabilization: The accumulator helps to stabilize the pressure of the water jet system. As water is pumped into the accumulator, it compresses the air or gas inside the chamber. This compressed air acts as a cushion, absorbing pressure fluctuations and ensuring a more even and consistent flow of water through the pump.

2. Energy Storage: The accumulator also serves as an energy storage device. When the pump is operating, it builds up pressure in the accumulator by compressing the air or gas inside. This stored energy can be released rapidly when needed, providing additional power to the water jet pump and helping to maintain a constant flow rate.

3. Flow Smoothing: The accumulator helps to smooth out the flow of water from the pump. As water is drawn from the accumulator, the compressed air or gas expands, pushing the water out in a more continuous and steady manner. This reduces pulsations and surges in the water flow, resulting in a more uniform stream.

4. Surge Damping: Water jet systems can experience pressure surges or water hammer effects when there are sudden changes in flow rate or valve operations. The accumulator acts as a surge damping device, absorbing these transient pressure spikes and preventing damage to the pump, pipes, or other system components.

5. Pump Cycling Reduction: The accumulator can also reduce the frequency of pump cycling. By providing a reserve of pressurized water, it decreases the number of times the pump needs to start and stop during intermittent usage. This can improve the pump's efficiency, reduce wear and tear, and extend its lifespan.

Overall, the accumulator plays a vital role in maintaining stable pressure, providing energy storage, and improving the performance and durability of water jet pumps.

A water jet pump is a pump that uses the power of a high-speed water jet to pump fluid. It operates according to the principles of fluid dynamics to boost pressure for waterjet cutting robots.Winwin's exclusive 100,000psi ultra-high pressure pump can cut 300mm thick metal while increasing cutting speed by 50% and saving 28% of the cost.