5‑Axis Sawjet Cutting Machine
Cutting Platform 3220 WATERJET/SAWJET 5A — Cutting Platform Specifications
| Effective Cutting Travel | X-axis: 3200mm, Y-axis: 2000mm, Z-axis: 200mm |
| Waterjet Cutting Head Angle | C-axis: 360°, A-axis: ±75° |
| Abrasive Saw Cutting Head Angle | C-axis: 360°, A-axis: 45° |
| Control Accuracy | ±0.01mm |
| Repeat Positioning Accuracy | ±0.01mm |
| Cutting Accuracy | ±0.1mm |
| Cutting Speed | 0.8-3 m/min |
| Spindle Speed | 3000-6000 rpm |
| Milling Cutter Speed | 18000 rpm |
| Structure | Oil-immersed guide rail |
| Overall Dimensions | 6100×3700×3500 mm |
| Saw Blade Diameter | 350-450 mm |
1. What is the total investment cost?
The total investment ranges from 150,000 to 350,000 USD for the machine, plus 10,000 to 25,000 USD for installation, freight, training, and utility upgrades. Ongoing annual costs for consumables and maintenance add 15,000 to 30,000 USD. Buyers should budget for electrical, compressed air, and water chiller system modifications.
2. How quickly will I recover my investment?
Most fabricators achieve payback within 12 to 24 months. This depends on utilization, labor savings, and material waste reduction. A shop processing 20 slabs daily can recover faster. The machine boosts throughput by up to 40 percent, enabling more jobs per week and higher revenue.
3. What is the daily operating cost?
Daily operating costs average 50 to 100 USD, covering garnet abrasive, saw blade wear, waterjet nozzles, and electricity. Abrasive consumption is roughly 0.15 to 0.30 USD per square foot of waterjet cutting. Saw blades last 300 to 500 linear feet in granite.
4. How much floor space does it require?
A typical Sawjet requires approximately 20 to 30 feet in length and 10 to 15 feet in width, depending on bed size. Additional clearance is needed for slab loading, material staging, and pump placement. Total recommended shop footprint is around 400 to 600 square feet.
5. How accurate and repeatable are the cuts?
The machine holds tolerances of ±0.005 to ±0.010 inches for both saw and waterjet cutting. Height sensors compensate for slab warpage automatically. The waterjet delivers a smooth finish at 120 to 150 grit, significantly reducing hand polishing time.
6. What materials can it cut?
It cuts granite, quartz, marble, porcelain, ceramic, sintered stone, solid surface, glass, and even metals like stainless steel. It handles brittle materials without chipping due to the waterjet's cold cutting process. Material thickness up to 4 to 6 inches is standard.
Waterjet Intensifier Pump · 60k – 90k psi
HyperPump · direct drive
Ultra‑reliable waterjet intensifier pump reduces energy cost by 30%. Continuous 24/7 operation.
See our intensifier pumps in operation
Universal retrofit / upgrade
Our waterjet intensifier pump is designed to directly replace pumps on most water jet cutting machines — same footprint, 30% higher efficiency, no plumbing modifications.
Next
Next
Related Products
Online Inquiry
Scan the QR code
Contact us
Email：service@winwinwaterjet.com
Address：63-32 Qixing Street, Shenbei New District, Shenyang City, Liaoning Province
